Getting your Trinity Audio player ready...

JET Tools continues to expand its jobsite lifting solutions with the S-Series Material Lifts, a lineup built to solve one of the biggest challenges contractors face, lifting safely and efficiently in tight, real-world jobsite conditions. Available in both 12 ft and 16 ft models, these lifts combine 450 lb lifting capacity, compact mobility, and innovative features that streamline setup, operation, and transport.

A Smarter Approach to Jobsite Lifting

The JET S-Series isn’t just about lifting; it’s about working smarter on the jobsite. Designed for HVAC, electrical, mechanical, and general construction trades, these lifts are optimized for:

-Tight indoor spaces

-Finished environments

-Repetitive overhead installations

With a 450 lb capacity across both models, you get consistent lifting performance whether you’re installing ductwork, piping, fixtures, or electrical components.

Three Operating Modes for Maximum Versatility

One of the standout features of the S-Series is its three-mode functionality, allowing contractors to quickly adapt the lift to different jobsite needs.

Lift Mode (Working Configuration)

This is your primary operating setup, designed for maximum stability and control:

-Lock the casters to secure the base.
-Unpin and swing legs forward into position.
-Engage leg latches to stabilize the frame.
-Extend stabilizers for added balance.
-Install forks (facing up or down depending on the load).
-Release the mast lock.

Once set, you can use a drill with a 3/4″ six-point socket to raise or lower the load, dramatically reducing manual effort.

Stow Mode (Transport Configuration)

When the job is done, the lift quickly converts for transport:

-Reverse the forks and engage the mast lock
-Move stabilizers forward
-Unlatch and raise legs, pinning them into transport position

In this mode, the lift can be:

-Nested with other units for efficient storage.
-Rolled on its casters.
-Tilted back for transport.
-Loaded into vans or trucks.
-Picked up with forklifts or cranes.
-Nested with other units for efficient storage.

Lay Flat Mode (Compact Storage)

Lay flat mode creates a low-profile configuration that:

-Makes loading and unloading easier
-Minimizes storage space
-Improves transport efficiency in tight vehicle setups

Drill-Powered Efficiency = Less Fatigue

One of the biggest advantages of the S-Series is the drill-compatible winch system.

Instead of manually cranking loads up and down, you can:

-Connect a standard drill.
-Raise/lower materials faster.
-Reduce physical strain on operators.

This is a major benefit for crews handling repetitive lifts throughout the day, helping improve both productivity and safety.

Choosing the Right JET S-Series Lift & Expanding Your Setup

When choosing between the JET JML-12S (12 ft) (JET2598) and JET JML-16S (16 ft) (JET2597) Material Lifts, it really comes down to working height and application demands, because both models are built on the same reliable platform.

The JML-12S (JET2598) is the go-to option for contractors working in standard commercial or residential environments, where ceiling heights are more moderate and maneuverability is critical. Its slightly more compact reach makes it easier to handle in tighter indoor spaces while still delivering the full 450 lb lifting capacity.

On the other hand, the JML-16S (JET2597) is designed for jobs that require extra height without sacrificing portability. With a maximum lift height of 16 ft 8 in, it’s ideal for commercial, industrial, and high-ceiling applications, giving crews the ability to safely position materials overhead without needing larger, more cumbersome equipment.

Expand Your Capability with the JML-FES Fork Extension Kit

To take things even further, the JET Fork Extension Kit (JET3013) adds another level of versatility to both the JML-12S and JML-16S.

This accessory is especially useful when working with wide ductwork, large panels or fixtures, and oversized or nonstandard materials. With a lightweight aluminum design and tool-free, slide-on installation, the extensions can be added or removed in seconds, making them easy to integrate into any workflow. The included detent pin system keeps everything secure during lifting, while the added support improves overall stability when handling larger loads. It also pairs with the adjustable pipe cradle system, giving contractors even more flexibility when working with round materials like conduit or piping.

Building on a Proven Platform

These new S-Series additions expand on the material lift lineup we’ve already covered, bringing improved portability, smarter storage options, and enhanced jobsite efficiency to an already proven category.

If you haven’t checked out our previous breakdown of JET material lifts, it’s worth a look for a deeper dive into how these tools compare across the lineup and where they fit into different trades and applications, here.

Overall, the JET S-Series Material Lifts and accessories are built to make lifting safer, faster, and more efficient on today’s jobsites. With smart features like drill-powered operation, compact storage modes, and the ability to adapt with accessories like the fork extensions and pipe cradle, these lifts offer real-world value for contractors looking to streamline their workflow. If you’re ready to improve how you handle overhead installs, this is a system that delivers both immediate productivity gains and long-term reliability, Don’t hesitate to reach out at cs@ohiopowertool.com or 614-481-2111 with any questions, comments, or concerns, and be sure to follow us on all your favorite social media channels to stay in the know on all the latest announcements, deals, news, and more!