When it comes to hydraulic tools that perform under pressure, durability is non-negotiable. That’s why Hydraulic Tech’s line of Power Team hand pumps stands out in today’s market. Engineered with rugged all-metal construction, these hand pumps are designed for the toughest industrial environments, from welding shops and heavy equipment maintenance to fabrication and field repair operations.
If you’re looking for a hydraulic solution that balances raw power, efficiency, and reliability, Hydraulic Tech’s all-metal hand pumps offer a wide range of options tailored to different applications and system demands. Whether you’re dealing with single or double-acting cylinders, high- or low-pressure jobs, or demanding materials like steel and iron, this lineup covers every base.
Why All-Metal Construction Matters?
Unlike plastic or composite components that can warp, melt, or degrade under extreme conditions, the all-metal design of Power Team hand pumps ensures resistance to heat, high pressure, and wear. These pumps won’t burn through in welding environments, and their heavy-duty formed metal handles are engineered for strength and reduced flex, minimizing operator fatigue over long shifts.
Each model is designed with built-in safety features like fill cap seals that double as pressure relief valves and inboard check valves that prevent load drift. These features not only protect the pump but also increase user safety and precision when metering hydraulic pressure.
PTP55 – Compact Power for Direct Control
(PTP55)
The P55 is a single-speed pump designed for use with single-acting cylinders. Delivering up to 10,000 psi with a volume of 0.16 cu. in. per stroke, it is ideal for applications with minimal free travel, such as fixturing, alignment, or pressing tasks in metalworking. It features an angled fill port, safety pressure relief, and a convenient design that allows for both horizontal and vertical filling. This pump is perfect for controlled use in tight setups with steel, aluminum, or dense composites.
PTP12 and PTP23 – Lightweight, High-Pressure Precision
Both the P12 (PTP12) and P23 (PTP23) offer single-speed functionality and are optimized for operations where compact size and portability matter. The P12’s lower oil capacity makes it suitable for lighter work with aluminum housings or small clamping setups. The P23, with its higher capacity and 3,000 psi limit, is ideal for medium-duty tasks that still require controlled precision.
These pumps work well for mobile maintenance crews and small fabrication jobs that involve steel components, brackets, and mid-weight metal assemblies.
PTP159 and PTP300 – Two-Speed Efficiency for Faster Work
For those who need faster operation and reduced handle strokes, the PTP159 (PTP159) and PTP300 (PTP300) deliver two-speed performance. Both pumps are ideal for powering single-acting cylinders, with a low-pressure stroke volume of 2.6 cu. in. and high-pressure output at 10,000 psi.
These pumps shine in applications like pressing, punching, or bending where cycles need to be repeated efficiently. The PTP300, with a larger oil capacity of 1.5 gallons, is better suited for extended operations with large hydraulic cylinders working on heavy-duty steel or cast iron assemblies.
PTP460 – Maximum Volume for Demanding Applications
(PTP460)
The PTP460 is built for heavy lifting and high-volume hydraulic work. With a 2.5-gallon oil capacity and 7.35 cu. in. per stroke at low pressure, this two-speed pump excels in machinery maintenance, large-scale fabrication, and field operations where large metal components need consistent force and control. It is especially useful for construction or shipyard work involving beams, platforms, or structural frames made from hardened steel.
Double-Acting Models: PTP159D, PTP300D, PTP460D
For setups that require movement in both directions, Hydraulic Tech offers double-acting versions of its most capable pumps. The PTP159D (PTP159D), PTP300D (PTP300D), and PTP460D (PTP460D) are engineered for use with double acting cylinders, allowing for extension and retraction control without needing two separate tools.
These pumps are ideal for complex hydraulic systems used in press operations, automated fabrication, mold handling, or synchronized tooling. From thick-walled steel presses to multi-position mechanical jigs, these models provide precise bidirectional force that enhances workflow speed and safety.
How to Use Hydraulic Tech Hand Pumps
Each Power Team pump operates using a manual handle to build hydraulic pressure. Start by connecting the pump to your cylinder using the 3/8 NPTF port. After filling the reservoir through the angled fill port, pump the handle to generate pressure. The two-speed models automatically switch from high volume/low pressure to low volume/high pressure during operation, which makes them ideal for quickly taking up slack and then applying high force as needed. Use the large valve knob for controlled release, especially when lowering loads or adjusting positions with high accuracy.
These pumps are best paired with hydraulic oil and should be used in conjunction with appropriate hoses, fittings, and safety gear. Their design makes them compatible with a wide variety of industrial materials, including carbon steel, stainless steel, forged components, and cast assemblies.
Hydraulic Tech’s all-metal hand pumps are more than just durable; they are engineered for real-world efficiency and operator control. Whether you’re installing equipment in the field, fabricating in a shop, or repairing heavy machinery, there’s a Power Team pump built for the job.
Don’t hesitate to reach out at cs@ohiopowertool.com or 614-481-2111 with any questions, comments, or concerns, and be sure to follow us on all your favorite social media channels to stay in the know on all the latest announcements, deals, news, and more!
