Checkout our OPT Milwaukee Pipeline page for all the latest M12 and M18 tools just released from episode 1. This will also be the page where we add new tools as they get released in Episode 2, 3 & 4 in the coming months as they are launched. Below are some of the new tools from Episode 1 that were never seen before!
M12 Pin Nailer 23 GA 2540-21 Kit & 2540-20 Bare – Launching Early 2021 (pre-sale coming soon)
The M12 23GA Pin Nailer is the most compact cordless pin nailer that combines precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. Its lightweight design provides unmatched productivity and accessibility into tight spaces and confined corners. A nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or soft woods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allows for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. This pin nailer drives 23-gauge headless pin nails ranging in length from 1/2″ to 1-3/8″ and can fire up to 750 pin nails per charge.
M18 FUEL Oscillating Multi-Tool 2836-21 Kit & 2836-20 Bare – Launch November 2020 (pre-sale coming soon)
- OPM Highest Setting: 20,000 OPM
- OPM Lowest Setting: 10,000 OPM
- Oscillation Angle: 4.2 Degrees
- Auto-Load Feature
- 180-Degree LED Light
- Variable Speed Dial
- Length: 12.2”
- Height: 3.9”
- Weight: 4.2 lbs w/battery
- 3-year warranty on battery
- 5-year warranty on tool
M18 FUEL 1” D-Handle Extended Anvil High Torque Impact Wrench w/ ONE-KEY™ 2869-22HD Kit $1299 & 2869-20 Bare $799 – Launching October 2020
- Anvil Type: 1” Friction Ring w/ Thru Hole
- Fastening Torque: 1,900 ft-lbs
- Nut-Busting Torque: 2,000 ft-lbs
- DRIVE CONTROL™: 4-Mode Customizable
- 360° Tool-Free Adjustable Handle
- RPM: 0 – 1,200
- IPM: 0 – 1,440
- ONE-KEY™ Enabled: Yes
- Lug Nut Mode: Yes
- Tool Length (w/ battery): 23.24”
- Tool Weight (w/ battery): 26.6 lbs
- Tool Warranty: 2 Years
M18 FUEL™ 3/8” Compact Impact Wrench w/ Friction Ring Kit 2854-22 $369 – Replacing 2754-22 – November 2020
- Nut-busting Torque: 250 ft-lbs
- Fastening Torque: 250 ft-lbs
- RPM: 0-2,400 RPM
- IPM: 0-3,500 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 4.8”
- Tool Weight (w/ battery): 3.9 lbs
Kit Includes: M18™ FUEL 3/8” Compact Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
*Also available as a kit with REDLITHIUM™ 2.0 Compact Batteries (2854-22CT $299) and as a bare tool (2854-20 $219)
M18 FUEL™ 1/2” Compact Impact Wrench w/ Friction Ring Kit (2855-22 $369) – Replacing 2755B November 2020
- Nut-busting Torque: 250 ft-lbs
- Fastening Torque: 250 ft-lbs
- RPM: 0-2,400 RPM
- IPM: 0-3,500 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 4.9”
- Tool Weight (w/ battery): 3.9 lbs
Kit Includes: M18™ FUEL 1/2” Compact Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
*Also available as a bare tool (2855-20 $199)
M18 FUEL™ 1/2” Compact Impact Wrench w/ Pin Detent Kit (2855P-22 $369) – Replacing 2755 November 2020
- Nut-busting Torque: 250 ft-lbs
- Fastening Torque: 250 ft-lbs
- RPM: 0-2,400 RPM
- IPM: 0-3,500 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 4.9”
- Tool Weight (w/ battery): 3.9 lbs
Kit Includes: M18™ FUEL 1/2” Compact Impact Wrench w/ Pin Detent, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
*Also available as a bare tool (2855P-20 $199)
M18 FUEL™ Compact Impact Wrench Protective Boot (49-16-2854 $39)
- Fits the following M18 FUEL™ Compact Impact Wrenches: 2854, 2855, 2855P
M18 FUEL™ Mid-Torque Impact Wrench w/ 3/8” Friction Ring (2960-22 $419) – Replacing 2852 November 2020
- Nut-Busting Torque: 600 ft-lbs
- Fastening Torque: 550 ft-lbs
- RPM: 0-2,575 RPM
- IPM: 0-3,100 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 6”
- Tool Weight (w/ battery): 5 lbs
Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ 3/8” Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
Also available as a Bare Tool (2960-20 $219) or with REDLITHIUM™ 2.0 Compact Batteries (2960-22CT $319)
M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Friction Ring (2962-22 $419) – Replacing 2861 November 2020
- Nut-Busting Torque: 650 ft-lbs
- Fastening Torque: 550 ft-lbs
- RPM: 0-2,575 RPM
- IPM: 0-3,100 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 6”
- Tool Weight (w/ battery): 5.1 lbs
Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
Also available as a Bare Tool (2962-20 $219)
M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Pin Detent (2962P-22 $419) – Replacing 2860 November 2020
- Nut-Busting Torque: 650 ft-lbs
- Fastening Torque: 550 ft-lbs
- RPM: 0-2,575 RPM
- IPM: 0-3,100 IPM
- 4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)
- Tool Length: 6”
- Tool Weight (w/ battery): 5.1 lbs
Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Pin Detent, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.
Also available as a Bare Tool (2962P-20 $219)
Also Available:
M18 FUEL™ Mid-Torque Impact Wrench Protective Boot (49-16-2960 $39)
- Fits the following M18 FUEL™ Mid-Torque Impact Wrenches: 2960, 2962, 2962P
M18 FUEL Sectional Machine Compact for ⅝” & ⅞” Cables 2818-21, 2818A-21, 2818B-21 – Launching November 2020
The M18 FUEL Sectional Machine for 5/8″ and 7/8″ Cable is the most portable and most powerful sectional machine for 1-1/4″ – 6″ drain lines. The POWERSTATETM Brushless Motor and REDLINK PLUSTM Intelligence delivers the power to clear heavy roots up to 150 ft out, providing more power than corded even at the maximum capacity of the machine. The sectional machine ensures the easiest transportation and setup on all jobs by being lightest weight and most compact tool in its class, and offers carry strap connection points for hands-free transportation. The M18TM REDLITHIUMTM High OutputTM HD12.0 Battery Pack powers through multiple jobs on a single charge, and increases safety by providing power anywhere without the use of extension cords.
M18 FUEL Compact Vacuum 0940-20 $199 Launching October 2020
- Air Volume: 32 CFM
- Sealed Suction: 80” H20
- Air Performance: 98 Air Watts
- Canister Capacity: 0.25 Gallons
- Inlet Diameter: 1-1/4”
- Height: 11.65”
- Length: 13.07”
- Width: 6.39”
- Weight: 4.35 lbs
- Warranty: 5-Year Limited
*Includes: M18 FUEL™ Compact Vacuum, Extension Wand, Powered Floor Tool, Floor Tool, Flexible Hose, Crevice Tool, Utility Tool, Brush Tool, Accessory Holder, HEPA Filter, and Foam Pre-Filter
*Batteries sold separately
*HEPA Filter Replacement available (49-90-2012)
M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum 0960-21 $199 Launching October 2020
- Air Volume: 45 CFM
- Sealed Suction in Water: 42”
- Canister Capacity: 1.6 Gallons
- Inlet Diameter: 1-1/4”
- Height: 11.9”
- Length: 13.7”
- Width: 8.7”
- Weight: 10.6 lbs
- Warranty: 5-Year Tool, 3-Year Battery
Includes: M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum, M12™ XC6.0 Battery, M12™ Charger, Hose, HEPA Filter, Crevice Tool, Utility Nozzle, and Wall Mount Kit
*Bare tool also available (0960-20 $129)
Accessories Sold Separately:
- HEPA Filter: 49-90-1900
- Foam Wet Filter: 49-90-2015
- 3 Pk Fleece Dust Bags: 49-90-2016
- 1-1/4” Round Brush Tool: 49-90-2017
- Vacuum Power Tool Adapter: 49-90-2018
M18 FUEL™ PACKOUT™ 2.5 Gallon Wet/Dry Vacuum 0970-20 $199 Launching October 2020
- Air Volume: 50 CFM
- Sealed Suction in Water: 47”
- Sound Power Level: 87 dB(A)
- Canister Capacity: 2.5 Gallons
- Inlet Diameter: 1-1/4”
- Height: 12.8”
- Length: 17.1”
- Width: 10.5”
- Weight: 11.3 lbs
- Warranty: 5-Year Tool
Includes: M18 FUEL™ PACKOUT™ 2.5 Gallon Wet/Dry Vacuum, Flexible Hose, HEPA Filter, Crevice Tool, Utility Nozzle, Vacuum Power Tool Adapter.